IF YOUR SEEING THIS !!!!! GASKETS ARE FOR SALE AND READY TO SHIP !!!!! THIS WILL REPLACE THE TOP GASKET FOR THE ALC and BRUT STYLE---STICKY RED POLYURETHANE LEAKY GASKETS !!!!! WILL FIT AND WORK PERFECTLY WITH NO MODIFICATIONS DID SOME RESEARCH --- THIS REAL RUBBER GASKET HAS THE 3 INCH ID AND A 4 INCH OD, !!!!!!!!!!!!!!!!!!!!!!! IT CAN ALSO FIT !!!!!!!!!!!!!!!!!!!! MANY OTHER PRESSURE BLASTERS CYCLONE DP48 Pressure pot Cabinet ALLSOURCE ( 41600 ) ALC MODEL ( 40228 ) 3" Diameter Tank Closure Gasket for Pressure Tanks ALC MODEL # FP-65 Closure Gasket 3 in. inner diameter ) EASTWOOD Pressure Model 100 AND 110. ( -UP GASKET 22005 ) ECONOLINE PRESSURE POT BLAST CABINITS ( LAGRANGE TANKS ) Keysco 40002 Sand Blaster. Brut Mfg Company ALL H Model Blasters - ( 81400 Tank Closure Gasket ) PROBLAST Pressure Pot Sealing Ring RAYZIST GL*** ETCHING PB100 ( Pressure Pot Sealing Ring ) SNAP-ON 250 LBS Pressure Blaster DEE-BLAST Pressure Sandblasters IKONICS IMAGING CrystalBlast Part # 104-21-176 And Some Of The SCHMIDT INDUSTRIAL POTS ANY TIME IS OK !!!! TEXT IS PREFERRED 316-258-8620 = LEAVE MESSAGE OR TEXT = THANKS EMAILS ----- mudbug58@gmail.com !!!!!!! I NEED YOUR !!!!!!! Phone Number and Shipping Address in message box as paypal does not give it to me! Or send me a text with shipping info thanks ---Accepting Pay-Pal ( friends and family ) click link below--- paypal.me/LARRYDMEEKS HOW TO REMOVE AND REPLACE THAT BAD TOP GASKET SEAL! Hi I now have two small videos that you can watch on your phone! Send a text and i will send you the videos!