Thanks, much appreciated. I'm going to do a stocktake of what I have and what I need soon. It was bought as a project in pieces so I'm not sure what I need? Cheers Sent from my iPhone using The H.A.M.B. mobile app
Taken a week out of work to go and help on my coupe. Decided to remove the rear quarters and clean out and blast the area behind.cut around behind the seams as I'm keeping those. Front fenders and rear quarters off to get blasted and epoxy finished before ***embly and refit. Sent from my iPhone using The H.A.M.B. mobile app
Ain't that the truth. I have a hard time believing it myself sometimes! Sent from my iPhone using The H.A.M.B. mobile app
Fenders rear area blasted then painted before re***embly of the internal frames Sent from my iPhone using The H.A.M.B. mobile app
That car will last another 50 years with all the hidden rust taken care of. It is disappointing to see a great cl***ic with nice paint rusting from the inside out. Well done!
Thanks. Yes with the epoxy etch and rust proofing after painting, it should be good for another 50 years! Sent from my iPhone using The H.A.M.B. mobile app
Thanks. The sheet metal forward of the firewall is away being blasted and put into primer. Can then hang it and gap it. Going to also blast the areas behind the rear quarters before they go back on. Ideally will then separate the body from the ch***is and get into some mechanical work Sent from my iPhone using The H.A.M.B. mobile app
Thanks man. Been checking in on your project as well! Sent from my iPhone using The H.A.M.B. mobile app
absolutely wonderful work from guys that know what they are doing well done look forward to more progress pics
And after many many years it's off for abrasive blasting and epoxy primer. The quarters will then be s***ched back onto the body along with the rear panels. The body will then be lifted and I'll start on the ch***is Sent from my iPhone using H.A.M.B.
Beautiful work to restore the car. My '51 was not in that bad of shape but I know your frustration of hopes of a quick paint and drive to what you find when you finally start prepping it.
And finally after 13 years it's seeing some primer. I'm certainly not going to miss sanding back the bare metal and coating with keyphos every six months Sent from my iPhone using H.A.M.B.
Haha! Yeah it's about as far as it can go. Will s***ch the quarters and rear back on them remove from the ch***is again. Preparing to order the trans and probably engine. Sent from my iPhone using H.A.M.B.
Went out to do a little more work today. Got to see the underside up on the hoist. Really happy how they've turned out. I've put down a deposit on an Olds engine and trans so once the trans arrives I'll place it, make mounts and can then finish the tunnel. The door corners have been radius'd and the rear quarters are off for blasting before being refit. I decided to also radius the fuel filler flap as it was a feature of the 'factory custom' Ford. Looking forward to seeing how it looks in primer. Sent from my iPhone using H.A.M.B.
The under body has now had the seams sealed and a coat of Wurth underbody coating applied. This will be painted black to make it cleanable. The ch***is is away for blasting and will also be painted. I've ordered my Olds Rocket and T350 trans from Tony at Ross Race Engines so looking forward to that arriving later this year. Sent from my iPhone using H.A.M.B.
`Having recently joining the shoebox club I have been reading all the threads, this build is exceptional and your work is amazing. HRP
The Jalopy Journal
