Hot Rods small A/C compressor

Yah I know, real hot rods don't have air, but you not married to my wife!!! So, I need a recommendation on the smallest A/C compressor available. I need something smaller than the Sanden 508. Ihave read the Sanden 505 is smaller, but have never seen one. Any recomendations are appreciated. This will mount on a '79 Buick 3.8 Turbo with a mini-alternator.
Dan
'28EssexNQS

 

I'd give vintage air a call.

 

here's a 507 I pulled off a 5.0 mustang about 20 years ago. it was part of an add-on AC system, but the owner added a Paxton blower and I had to find and install a factory compressor to make the brackets/pulleys all work. So this thing's been sitting in my shed ever since, waiting for someone to want it.

Also shown between two 508ish compressors for size comparison

 

A friend of mine used a 507 from a Porsche 911 for his AC install on his Anglia street rod with a SBF... it looks just like the one squirrel posted.

 

Datsun

 

Needs to work with R134A correct?

Whats the amps on that alt? probably have to change that too...

 

505 is okay for a coupe but you'll want a 507 for a sedan.

 

first do the google images search

http://www.google.com/images?hl=en&...anden+505+compressor&btnG=Search+Images&gbv=1

 

Thanks to all who replied. I have a 60 amp alternator, should handle it. The 507 looks good. Now to find a good supplier.

Just remember, "move faster, I here banjos"!

Thanks
dmarx

 

Here is a 505 on my
37 Chevy coupe........

 

Paint... That's pretty trick AND low...did you fab that mount?