**SOLD!!!*** Thank you!!!! DeSoto 4 Carburetor Hemi Intake Manifold I honestly do not know if this is for the short or tall deck Hemi engine. But! I can take whatever measurements that you need to determine if it is correct for your DeSoto Hemi. The manifold looks to be in good condition with two exceptions: 1: There is one Heli-Coil in one of the carb mounting holes. Looks fine. 2: One of the threaded plug holes has been cross-threaded in the past and the threads are in rough shape. I cleaned the threads up as best as I could and found a plug that fits it pretty well. In the photos, you can see the plug and how it fits when snugged down. In my opinion, if you are CAREFUL and thread the plug in with plenty of sealant in the ORIGINAL threads (not the cross-threads), you will be fine. It will take some caution though because the manifold casting is not very thick in that area. Or, you could get a slighter larger pipe plug. Either way, I think you would be fine if you are careful. ***SOLD!!!*** plus shipping or you could pick it up in-person in SE Virginia. Thanks. Stan
The Jalopy Journal
