Starter Button

I need a starter switch, the push ****on type, for my 51 ford truck. I converted it to 12 volt neg ground, and the stock ****on grounds through the body of the switch. Does anyone know if NAPA sells just a push ****on starter switch with 2 lugs on the back. I looked online but that got me nowhere, and if I walk into the local store without a specific application they're gonna look at me like I have 3 heads. Thanks in advance,
Jim

 

Just use your old solenoid and starter ****on, it worked for me for ten years on my forty ford.

 

They are usually found in the electrical section of most parts stores.

 

Look here

http://www.jegs.com/i/JEGS/555/10310/10002/-1?parentProductId=745302

 

napa part # STB3

 

thanks everyone

 

The switch does not care about - or+ ground, ground is still ground.

 

standard ignition has a stock looking one with 2 poles. on my '47 car i used the stock ****on and used a different relay, so it won't crank until the ignition switch is on.

ssb-1

 

CarQuest

I think it is their version of the SSB1

 

http://www.jalopyjournal.com/forum/showthread.php?t=494172

also has info you can use

 

there you go..........

 

Funny how so many new car ads on TV show off the "push to start" ****on on the dash - gee, ain't new technology impressive?





Later, *****6