Projects stroked ford inline 250

hi all
ive heard and and read a little bit about a stroker inline ford 250. ive been told if you take a 250 block and bore it 60 over and use a crank out of a 200 and rods and pistons out of a 4.3 it makes it a stroker. im not sure about any of that but a stroker has to be possible and i am very interested in building one if any body knows anything about this please let me know so i can get it all put together thanks

Bronson

 

Off top of my head you have the 250 and 200 mixed..250 crank in a 200 will give 250 but since the deck is shorter in the 200 you need a piston with shorter pin height, thus the 4.3 piston..Check here: http://www.fordsix.com/tech.php