Projects T Roadster Roll Bar

Here's a bar high enough to offer minimal protection in a T-Bucket. Looks like ****. I can say that. It's my car. Just wanted to say it looks like **** to save y'all the trouble, so let it go.

Bob

 

I borrowed a bender and did mine for the track roadster pickup. It's a bolt in with plates and fine threaded 3/8" ARP 12 point bolts. Its has 6 attaching points in the box and a single down tube in the cabin.

The rearmost tubes go to the top of the frame kick up and there are two shorter ones that tie into the front of the kick up. The hoop attaches to the top of the main rails.

Charlie

 

Bob

Attach more pictures of your roadster. I'm likin some of it.

 

Here's another photo:

 

Charlie Chops car looks better in person...

 

I don't know. Looks pretty good in the pictures.

 

If it helps, here is how I mounted my roll bar hid an 3rd brake light under the padding.

The padding stops the roll bar rubbin on the top as well as giving some protection when the top is off.

 

Plus one on the roll bar brace should you ever decide to go that route... if you haven't already chosen...

 

That is one tough looking roadster pickup. Well done!
Tom