Register now to get rid of these ads!

"TECH MONTH SMACKDOWN".... time to decide the WINNER!

Discussion in 'The Hokey Ass Message Board' started by wingnutz, Jan 16, 2009.

?
  1. Tech Month Submission: Novel Slimline Column Drop:

    1.9%
  2. Tech Month CHEAP and EASY Steering column (under $20)

    3.7%
  3. Tech: (simple) Olds water crossover

    1.0%
  4. caveman tech II - rebuilding your cowl top from scrap

    2.8%
  5. Hot Rod Institute 33 Chevy PU Chain Steer

    0.7%
  6. Caveman tech - building a bellhousing for a flathead cadillac

    14.7%
  7. **TECH** door buttons on the cheap

    0.2%
  8. Tech small rod and tubing bender

    0.9%
  9. Tech Month:Reaming Spindles CHEAP

    0.2%
  10. tricky patch panel fabrication and installation

    1.2%
  11. TECH MONTH: Stepping lower A arms

    0.9%
  12. cutting down a backglass

    1.9%
  13. TECH : Buick Ventilation Motor Swap

    0 vote(s)
    0.0%
  14. 1951 Buick Frenched my Headlights / Tech...

    0.9%
  15. How to Reface/Replace Your Own Gauges

    1.2%
  16. Build a heat shield - cheap.

    0 vote(s)
    0.0%
  17. Triangulated rear suspension under a 46 Ford

    0.2%
  18. 1951 Buick Fan Shroud / Tech...

    0.2%
  19. TECH: Installing 54 Mercury taillight lenses into your kustom

    1.0%
  20. buick drums on the cheap!!! well, sorta...

    1.2%
  21. How to splice wires

    1.6%
  22. Tech Month: 11 tooth chrome grille for under $150

    1.9%
  23. Old school chevy electronic ignition

    6.6%
  24. Hemi Tech, 392 Dist swap to 331-354

    0 vote(s)
    0.0%
  25. Tech Month~~Home made metal shaping tools

    16.3%
  26. Custom Taillights (tech week)

    0 vote(s)
    0.0%
  27. Tech: Real easy, real cheap tail light gasket.

    0 vote(s)
    0.0%
  28. Tech: Scratch build References

    0.2%
  29. Remove early Ford drums with home made puller

    0.3%
  30. Tech- The Ultimate Engine Stand:

    1.4%
  31. Tech: How to salvage your original, rusty gas tank

    0.5%
  32. TECH: Making a LWB to a SWB - cutting a '55 - '59 Chevy Truck Frame

    0.5%
  33. 1951 Ford Truck Project Pics - (Lowering The F1)

    1.0%
  34. Quick tech Poor mans dimple die

    0.3%
  35. Tech:Falcon-Comet-Ranchero-Chevy II Nova Roller Bearing Spring Perches

    0.3%
  36. ***Homemade 32 Grille Insert Tech****

    0.5%
  37. Putting a 32 Header in a 31 Model A w/Lots of Pics

    3.8%
  38. Leatherback to Steelback – Vicky's Got Curves In All The Right Places...

    0.3%
  39. Tech Month Low Buck Nailhead solid motor mounts

    0.5%
  40. Model A Ford Center Steering Box

    0.2%
  41. Model T Rear Safety Hubs

    0 vote(s)
    0.0%
  42. Lowering the of the Model T Ford

    0 vote(s)
    0.0%
  43. TECH new boards for old door panels

    0.7%
  44. Low buck, home built dual plane HEMI intake

    6.5%
  45. ‘52 F-3 build-up with a few tech mods.

    1.0%
  46. DIY Open Drive Banjo Conversion

    3.5%
  47. Hard to remove screws Removal

    0.5%
  48. Tech: Cheap Roadster Top

    2.8%
  49. Self Storing, Self Locking Hood Prop

    0.2%
  50. TECH - Filling trim holes.. EASIEST CHEAPEST WAY

    0.2%
  51. Tech: Piston Shifter Knob How To:

    0.2%
  52. **TECH** How to make a banjo steering wheel!

    3.3%
  53. AIR RIDE on early GM IFS

    0.2%
  54. $12 HOOD BLISTERS to hide your HEMI

    2.6%
  55. A different way of mounting a 3 piece hood

    0.3%
  56. Laying out LOUVERS the easy way.

    0.2%
  57. Tech Submission: The dreaded bumpsteer.

    0.5%
  58. TECH - EASY way to Section, chop, pancake a 50's hood

    0.5%
  59. TECH - Electric Wipers

    1.9%
  60. TECH: Bench Seat Build

    2.8%
  61. TECH: Making gaskets, cheap and easy

    0.7%
  1. jhnarial
    Joined: Mar 18, 2007
    Posts: 410

    jhnarial
    Member
    from MISSOURI

    [​IMG]

    Shoot Zibo you just got those broke inn.All you need is a little duck tape around your left thumb.:D:D:D
     
  2. GizmoJoe
    Joined: Jul 18, 2007
    Posts: 1,300

    GizmoJoe
    Member

    Zibo! Gloves? :eek: You can't call them gloves! :eek:
    They USED to be gloves!
    They are un-gloves! If they were anymore dead they'd be pushing up... ok ok a Monty Python skit in the making. You get the idea.
    I hope you use some of the winnings to get something that covers up the hands a bit more. ;)

    As for changes... have to think about that for a while. A poll/thread would help get some ideas and, of course, the changes would have to be approved by the head-folks here.

    Personally I think that there were SO many great techs that the non-winners (can't call them losers!) should at least get a chance to re-enter in the next tech week or have a runner-up category or something.
    I mean, some of those would have won hands-down in a "normal" tech week. Don't want them too discouraged.
    As usual, just my opinions.
     
  3. lockwoodkustoms
    Joined: Dec 22, 2005
    Posts: 3,910

    lockwoodkustoms
    Member

    DRuss32 , You will get them next time. I can't wait for your next tech post
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.