Through Bolt for MII

Caught a big rock backing up and*******ed the thread on the lower A arm thru bolt. Does anyone have a line on where to get a new one? This is a wider one. It was originally a FatMan unit but the closed shop/

 

Fatman sold a lot of their stuff to another company or companies. See below, direct from Fatmanfab.com....


Unfortunately, Fatman Fabrications has ceased operations.

We have provided everyone’s information to our lawyer. They will be sending out claim forms for a refund on all orders and deposits. Please email me at fatmanfabrications@myyahoo.com if you need any****istance with the required information to file a claim, or if you have any questions.

Update 5/29/25:

Some of the intellectual property has been sold. Here are the new contacts for some of our products with more information to follow:

For tubular control arms, drop and raised spindles, frame stubs, crossmember kits and bolt-in kits contact:
Southern Rods
southernrods.com
1-800-787-8763

For dropped uprights and steering arms contact:
Down Right Fab. on Facebook
980-328-9993

For bushing kits for our MII based control arms:
H and R Molding
attn: John S.
704-289-2998

 

Having the dimensions would help a great deal, even if it is a special bolt.

 

McMaster-Carr. An ordinary Grade 8 bolt and flat washers will work fine. I think the factory Ford are 5/8" diameter, Fatman I can't say if it is the same or not. Torque appropriately.

 

I seriously doubt FatMan was having bolts made to order. McMaster is a good source. Measure it and order from them.