Hot Rods Torque settings

Am restoring an A rpu with a 57/283 and a 57 Dual Range hydro. Both out of a 57 Chev pickup. Need torque settings for the following: Torque on 6 bolts from flywheel to crank
Torque on 18 bolts converter to flywheel.
I don’t have a book old enuf to find what I need. Any help would be great appreciated
Jerry

 

Google "SBC Torque Settings". Google is your friend.

 

or read the manual

http://chevy.oldcarmanualproject.com/shop/1955truck2/index.htm

If the manual doesn't have the specs for that specific bolt, you can get it tight enough by knowing what size/grade it is, and use this chart

 

If Mr. Google or someone else doesn't come through I'll check my Motors Manual in the shop tomorrow for you.

As usual Jim comes through with what you need and as usual in record time.

 

I use a standard torque table for most. Aftermarket rods are the exception.

 

Many thanks to all who responded to my thread. I “got er done” with all ur help!