I was gathering these parts for myself before getting sidetracked and invested in another project. I have more photos available. Asking $4000 or best offer. No title. The rear body is a 28/29 Sport Coupe, has repair panels welded in and is solid but surface rusted. The lower body rails are solid replacements but are surface rusted. No trunk lid. The doors are crusty but solid, some rust in the center of the door panel but the exterior framing is intact. Hinges line up with the cowl hinges. The cowl is a 30/31 and is solid except for the lower quarter on one side which is bondo’d so I don’t know what’s under there. The rest is so good it must be minor. The stainless strip around the cowl at the hood is included. Windshield posts have been cut off. Body parts are separated. ‘32 frame rails are reproduction, manufacturer is unknown. Minor surface rust from storage, like new... well, they are! ‘32 front crossmember and stock spring. The cross member is cut on the back side but is still structurally sound. Front spreader bar, appears to be stainless and home made. ‘32 ford truck rear end and spring with ‘40(?) juice brakes (Condition unknown but it rolls free) ‘39 (?) transmission, shifts but the lever has a lot of side to side play. I’m including Vern Tardel’s small book on these transmissions with it. (Condition unknown) Late Ford front spindles with juice brakes, king pins and bushings seem tight, brakes will definitely have to be rebuilt Four ‘40(?) Ford wheels, two reversed, two standard, with very old tires having a lot of tread.
The Jalopy Journal
