Event Coverage What are YOU doing to get ready for the 2015 Meltdown Drags?

Jeff what are the winter project plans for the Okiedoker? Also are you going to have her together for the Hunnert Car??? Jimbo...

 

I played with one photo.

 

Jim-

I am tearing apart the rear end this weekend and the goal is to have it back together for the Hunnert Car Heads Up. Once I tear it apart I should have a good sense of if I will be able to get it done in time.

During the winter I am going to replace the seats with some low back buckets and freshen up that tiny little small block...

 

Hum... Jeff that tiny SBC must be running pretty damn good to grenade that rear end...! By freshening it you mean throw some Rod & Main bearings in her?
Jimbo...

 

Something like that Jim...nothing to see here folks....

 

Jeff

Maybe freshen it up with a Dart (raised cam location) block.

A tiny little Lycan Mouse Motor

 

The "Weremouse"...!

Scott

 

"THE WEREMOUSE" HOLY MOLY SCOTT, THATS GOLDEN! I GOTTA WRITE THAT DOWN!

 

Any body got video footage of All Hacked ups wheel stand ?? Joes looking for a video lol

 

Art

Judds photos of the Meltdown Drags 2015 took some cool pics of all Hacked up with wheels
in the air. #977 to #980 .

Norb

 

Could you quote the post since I don't know why the phone photos don't always show up?

 

I was thinking after seeing Joe's pic that we should change this thread to "What are you fixing after..."

I thought you guys would like to see the pic of the leaf spring pins from the Okie Doker....Yes, I am sure at one point in time those bolts had heads on them, but they are long gone. In addition, the welds on both perches broke and the ears of the yoke are all broke as well.

So, a new yoke is on it's way. The old perches are gone and new ones have been welded on. The housing is being straightened, a new drive shaft has been ordered and god willing it will all go together on 9/11 in time to race it at the Hunner Car Heads Up on the 12th.

 

.., so continues the drama from "Broke Back Mounts n ......, stuff".

 

..., lot of wreckage from a Black n Decker fish tank motor.

 

Shots fired!Police line,do not cross!!!!!!

[emoji16]

 

Silver Bullets, Some one hunting a ...... WEREMOUSE

 

Oh Boy.......I guess you saw the whole thing from where you were sitting,right by the starting line.....Because of your busted-ass rear end in the Brokey Croaker,huh...?[emoji38]

Scott

 

This is great!

 

I have to give credit where credit is due: Ric sent me that one a while back,and I've just been waiting to throw it around ....lol

Scott

 

Just got back from the HAMB Drags
Got a few laps in the 62
Turned a best of 12.76 @106

 

Now her t

Now your talking!

 

I gave myself a pat on the back for that one.
When I got back from the Meltdown Drags I found that my cam had shit the bed.
So I installed a Isky Z 55 that was a little smaller than the Crower.

 

Congratulations you sorted it out..... Shes Real Fine My 409 all the way home.

Did you switch to the open intake manifold?

 

12.76 is more like it James. The Meltdown times were off for a reason. You deserve a pat on the back.

 

That's better!!![emoji4]

Scott

 

Seems like all went well at the hamb drags for everyone I talked with hell the ol Willys ran a 12.74 smokin the tires but hey the ol Chrysler 833 is holding up good so far

 

Norb I stayed with the stock intake hoping to get some good base line runs in so then I can tell if the change is a help or not.