Register now to get rid of these ads!

What did you get done this weekend?

Discussion in 'The Hokey Ass Message Board' started by dv8, Apr 27, 2008.

  1. jdubbya
    Joined: Jul 12, 2003
    Posts: 2,435

    jdubbya
    Member

    Drove the old truck saturday night, had to check out new cruise night, and did some supervising at a buddies house. All vehicle builds need atleast one supervisor, if for nothing else, to make sure the beer gets drank.
     
  2. ramrod2624
    Joined: Dec 19, 2006
    Posts: 648

    ramrod2624
    Member

    got alot of yard work done yesterday. washed and cleaned the 59 in the AM before it got to hot. looked at the garage a few times maybe ill get in there and clean that if it cools down
     
  3. Set my 62 C10 front cab mounts up and drilled the cab floor for the closer spacing due to the 66 C10 chassis I'm using.
    Cleaned the garage up some more.
    Had a sinus attack too. Lovely pollen!
     
  4. d2_willys
    Joined: Sep 8, 2007
    Posts: 4,320

    d2_willys
    Member
    from Kansas

    A whole lot of nothing as far as cars. Had other things on my plate.
     
  5. ...doc...
    Joined: Feb 18, 2007
    Posts: 755

    ...doc...
    Member
    from Houston

    cleaned up the shop, then made a mess cutting off the tank mounts on my e-bay motorcycle gas tank, so I can mount the tank differently.
     
  6. ...bought a pre-war bicycle at an auction for $1.00 and got a free mini-bike,
    ....both need work, but can't beat the price.
     
  7. 38plymouth
    Joined: Apr 11, 2008
    Posts: 419

    38plymouth
    Member

    I sanded some bondo for an hour this morning and then my wife caught me and kicked me out of the living room. Been moping around ever since. Be glad when the weekend gets here......wait a minute
     
  8. All day Sat doing heavy yard work.
    All day Sun reorganizing the shop.
    Tonight.....Motrin and Wild Turkey.
    Tomorrow...back in the yard.

    Showing the place to a potential buyer Tuesday.
     
  9. classicfins
    Joined: Dec 16, 2006
    Posts: 592

    classicfins
    Member

    Not much unfortunately. Setup our vendor booth at a local festival and spend the weekend trying to make a few bucks. Got home Saturday night and the 39-41 axle, wishbones and spring I bought from Mike B had arrived (Thanks Mike!), as well as my new smoothie wheels and center caps from Total Performance. Now if my '26 Dodge cowl would ever get here I can go for a ride. Well, maybe not but I can pretend to ride.... LOL
     

    Attached Files:

  10. Vorhese
    Joined: May 26, 2004
    Posts: 769

    Vorhese
    Member

    I spent all weekend working on my Desoto. I've been rebuilding/painting from the intake manifold up. I cant believe this thing actually ran. God I wish I had a media blaster.
    All pics http://vorhese.com/gallery/album265
    [​IMG]
    [​IMG]

    I also have been working on my motorcycles and 49 F1. Looks like I'll be doing a clutch job on the F1 soon
    [​IMG]
     
  11. 29paul
    Joined: Dec 30, 2007
    Posts: 267

    29paul
    Member

    Went to rod run with Druss Sat. Sunday was going to work on windshield but the post I got fri dont fit.Thats Hotrodding
     
  12. Elvisaurusrex
    Joined: Dec 28, 2007
    Posts: 403

    Elvisaurusrex
    Member

    Went all weekend being blown off by ladies and trying to get my welder set up..
     
  13. 49ratfink
    Joined: Feb 8, 2004
    Posts: 20,122

    49ratfink
    Member
    from California

    got to the Vallejo swap at about 7:00 this AM, left Vallejo about 8:00 and went up to the Sacramento swap. got home and took a big nap with the AC on.
     
  14. shitbox2
    Joined: Sep 5, 2005
    Posts: 434

    shitbox2
    Member

    got me anew car chrysler crossfire oh yeah
     
  15. job rated
    Joined: Jan 23, 2008
    Posts: 29

    job rated
    Member

    Went wakeboarding.:D
    Finished removing and cutting up the body on the frame donor for my 52 Dodge (an 89 blazer).:eek:
    Lots of yard work as always:mad:
     
  16. Thursday night My apprentice and I made a bracket to mount the shifter in the '46 (first time I've touched it since Billetproof, I was kinda hoping the would be enough room to sink the shifter into the floor, but no dice). Friday, went and saw what was left of Rare Earth at a free concert on the water, Saturday and part of Sunday, I made all new curtains for my Marshmallow ('78 Burro) camper.

    Now I'm playing on the computer and watching belly dancing aerobicizing on Fit TV... I need a life.
     
  17. lostn51
    Joined: Jan 24, 2008
    Posts: 2,550

    lostn51
    ALLIANCE MEMBER
    from Tennessee

    how did your blaster work? im thinking about building one like it i think my compressor should keep up, but you never know.
     
  18. dodgeman33
    Joined: Mar 19, 2002
    Posts: 89

    dodgeman33
    Member
    from Indiana

    I went drove down to Lebanon and hung out with Monzadood and Mcdaniel....
     

    Attached Files:

  19. Adriatic Machine
    Joined: Jan 26, 2008
    Posts: 740

    Adriatic Machine
    Member

    I changed the front axle joint on my daily - jeep cherokee. It's still clunking, I think I detonated the front diff.
     
  20. chaddilac
    Joined: Mar 21, 2006
    Posts: 14,043

    chaddilac
    Member

    Got my trunk lid made and ran my fuel lines. also mocked up a cardboard tank!

    [​IMG]
     
  21. AD
    Joined: Aug 7, 2007
    Posts: 393

    AD
    Member

  22. Littleman
    Joined: Aug 25, 2004
    Posts: 2,643

    Littleman
    Alliance Member
    from OHIO, USA

  23. Mostly sitting on my ass reading Hokey ass message board...
    Time for Top Fuel from Atlanta now..gotta go.....
     
  24. willie57
    Joined: Feb 21, 2007
    Posts: 378

    willie57
    Member
    from wisconsin

    Had to work. Got a few things done on the 51.
     
  25. lostforawhile
    Joined: Mar 23, 2008
    Posts: 4,160

    lostforawhile
    Member

    lots and lots of wiring finished. and played with my black lab. :)
     
  26. dgaf1969
    Joined: Mar 25, 2008
    Posts: 27

    dgaf1969
    Member

    mounted 16 bridgestone 24.5s, 4 floats, pulled a cat 460...and shit loads of maintinance...
     
  27. gilty
    Joined: Jun 1, 2006
    Posts: 88

    gilty
    Member
    from Pacific NW

    Warmed up enough over a weekend I was home, so I spent Saturday cleaning up the winter mess/disorganization in the garage, then spent Sunday completing the install of some new spindles in the stude while the kids buzzed around the garage with me. Good times!
     
  28. chuxx
    Joined: Jul 15, 2007
    Posts: 208

    chuxx
    Member

    Vorhese, that Desoto is badass.

    Road trip to a wedding on Saturday, just me and the wifey, we talked about our feelings.....Sunday, threw a birthday party for my stepmom and took my brothers for a ride in the Roadking, carb issues almost had us pushing her back home......all in all, A1 weekend.
     
  29. Pops
    Joined: Jul 10, 2006
    Posts: 486

    Pops
    Member Emeritus
    from Tulsa

    Saturday, after overcoming a fuel related problem or two, I finally got the '39 started. After a couple of phone calls and some advice from friends, I got the carb adjusted so now it's starts and idles. After all these years since the wreck, it feels really good to know it moves on it's own once again. Today, I spent working out a couple of wrinkles in the roof, (Re:Flamedabone's photo above) and blocked out the last few places on the body, now ready for another coat of primer. I hurt all over - it sucks gettin' old.

    J.
     
  30. 1oldrat
    Joined: Feb 9, 2006
    Posts: 1,884

    1oldrat
    Member

    Went to carlisle on Friday,Went to Virginia on Saturday to pick up a 442,bought a roadster pick up on Sunday,sold the roadster pick up on Sunday.Worked on my dining room and my wifes nerves.I had a busy weekend can't wait to go to work tomorrrow,.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.