Register now to get rid of these ads!

What's The Temp in Your Garage?

Discussion in 'The Hokey Ass Message Board' started by stan55, Jul 4, 2005.

  1. What about putting an old furnace squirrel fan in your garage?? cheap and if you mount it at the furthest point away from any opening windows, it draws cool air through. We used to have one in the loft of our A-frame cabin. The air pulled through was a hell of a lot cooler than what was in the cabin. Old fans are cheap.
     
  2. PAPASMURF
    Joined: Jun 7, 2004
    Posts: 508

    PAPASMURF
    Member

    in my garage today one-hundred-and-really-fucking-hot-in-there. But I was still weldin and grinding.
     
  3. It's a nice cool 70 degrees in my shop this morning. My brother lives in Phoenix and is forever telling me 'It's a dry heat'............don't turkeys cook in 'dry' heat????????
     
  4. InDaShop
    Joined: Aug 15, 2004
    Posts: 2,796

    InDaShop
    Member
    from Houston

    One word, Houston!


    I haven't REALLY worked in the shop for about 3 weeks. No A/C, sheetmetal roof, no insulation, no A/C. Its basically useable 8 months out of the year. Summer time equals rounding up parts, plotting, planning, working to pay for parts. I'm not going to spend all of next summer crusierless like this one.
     
  5. du$ty
    Joined: Jan 9, 2002
    Posts: 1,366

    du$ty
    Member

    hotter than shit.
     
  6. rodrelic
    Joined: Mar 7, 2002
    Posts: 466

    rodrelic
    Member

    Mine is 12 in blocks and half in the ground. Keep the doors shut and it stays 65-70 when it's 90 outside. Also retains heat in the spring and fall. But when it get's cold it take's some wood to bring it up to speed, best to keep a fire going. Next time I will build all underground, batcave.
     
  7. 71 degrees, 24/7/365
    Gotta have air conditioning in the humid south
     
  8. Slide
    Joined: May 11, 2004
    Posts: 3,021

    Slide
    Member

    This pic was taken in my garage over the holiday weekend. I was still welding/grinding away.

    [​IMG]
     
  9. Deuce Rails
    Joined: Feb 1, 2002
    Posts: 2,016

    Deuce Rails
    Member

    Yeah... But how cold does it get in the winter?
    I think sub-zero and snow is harder to work around than 100 degree sunny days! ;)
     
  10. Rusty
    Joined: Mar 4, 2004
    Posts: 9,482

    Rusty
    Member

    Gotta be in the 100's in my shop till I get it aired out a little.
     
  11. TRUCKRODDER
    Joined: May 29, 2005
    Posts: 329

    TRUCKRODDER
    Member

    Around a hundred , then I wait a couple hours for the a/c to cool it off :D
     
  12. Gracie
    Joined: Apr 19, 2001
    Posts: 1,257

    Gracie
    Member

    Heat I can handle, its those damn skeeters back in Bama that I surely don't miss!

    It was still 100 at 11pm last night.
     
  13. 30roadster
    Joined: Aug 19, 2003
    Posts: 1,793

    30roadster
    Member

    Lets just say it's hot enough we are all wishing for Dennis to come our way. Galvestons beaches need a clean-up anyway :D . No rain since the first of May...... we have been cooking in a furnace for 8 weeks.
     
  14. Smokin Joe
    Joined: Mar 19, 2002
    Posts: 3,770

    Smokin Joe
    Member

    I can handle the heat in the garage. It's the shoveling the drifts and chipping out the ice with a 6 foot breaker bar just to get the damned door open in the winter that gets to me.
     
  15. Gotgas
    Joined: Jul 22, 2004
    Posts: 7,198

    Gotgas
    Member
    from DFW USA

    It's hot in Texas this time of year. It was 112* in my garage Sunday, and very humid. I didn't get much done in the 30mins I spent out there before I damn near sweated myself dehydrated.
     
  16. AaronP
    Joined: Mar 15, 2005
    Posts: 334

    AaronP
    Member
    from Hooker, OK

    It's friggin 110 in the paint room right now. The paint is dry before it leaves the gun. We will painting late again tonight when it cools down.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.