Who makes A model patch panels that fit?

Looking to buy quite a few patch panels and am wondering who makes good qulaity ones that fit. Thanks guys.

 

Here's a bump since I'm also interested in this information.

 

most suck. i made dies for my bead roller to make my own

 

The ones you buy are crap. They take longer to fit, than rolling your own.

 

yep make them your self , it`s easier.

 

Most of them do SUCK ASS>..they never fit right..the lower ones are close
but if you need to replace the lower rear Quarters or "Buns" as there called..forget it...the replacements are very wrong...I ended up scoring a set of old quarters THANK GOD!!! cause now it looks good...

 

Ya I'll second the crap factor. Most of the ones I bought for the common pieces were from 09-40 on ebay. Required some massaging to get a decent fit. Other stuff that I got from Brookville and Sac Vintage Ford were closer, but by no means a perfect fit.

 

Bugger, you would think it would have to be pretty easy to get these right. Might have to try the 09-40 ones.