Site Links Affiliated by SOVRN.
Register now to get rid of these ads!

My old 56 Chevy

This is a 56 I bought in 2004 and owned for a short time. It had been an old drag car, with a narrowed early Olds rear end (4.88 gears and a spool), Alston coil-over rear suspension, and a 10-point r

Filters:

Type:
Image Uploads x
Remove All Filters:
x
Sort By: Date

Sort By...

Filters

Type Filters

327 in 56 Chevy
Craig Owens

Craig Owens

My old 56 Chevy

327 in 56 Chevy

0
277
0
16 Jun 2010
Finding a home for that 327...
Craig Owens

Craig Owens

My old 56 Chevy

Finding a home for that 327...

0
294
0
16 Jun 2010
The 327 out of my 55 Chevy. I freshened it up with the heads rebuilt, a hot new Comp Extreme Energy cam, and a new high volume oil pump. I'd been running a Muncie 4 speed with it in my 55, but the 56 had a race-built 400 turbo with a 3500 stall converter. The 56 had 4.88 gears with a spool. It made for a car that was fun around town and for short drives, but not much good for long trips or highway use.
Craig Owens

Craig Owens

My old 56 Chevy

The 327 out of my 55 Chevy. I freshened it up with the heads rebuilt, a hot new Comp Extreme Energy cam, and a new high volume oil pump. I'd been running a Muncie 4 speed with it in my 55, but the 56 had a race-built 400 turbo with a 3500 stall converter. The 56 had 4.88 gears with a spool. It made for a car that was fun around town and for short drives, but not much good for long trips or highway use.

0
286
0
16 Jun 2010
56 Chevy Engine Swap ...got that big 'ol bugger out.
Craig Owens

Craig Owens

My old 56 Chevy

56 Chevy Engine Swap ...got that big 'ol bugger out.

0
460
0
16 Jun 2010
56 Chevy Engine Swap. Just getting ready to pull the 427 big block. The plan was to freshen the 427 and install in my 55 Chevy, take the 327 from my 55 and freshen it up, clean up a few details on the 56 and have some fun with it, then sell it, taking any profit to rebuild the 427. The 427 had some good stuff in it, but the block and been damaged, probably from a clutch explosion, and welded up, plus it was already bored .060. Heads were amateur ported to the max, so I didn't want to use 'em. Cam had wiped out, which was why the previous owner sold the car in the first place. I ended up finding a 454 in parts, and building that instead.
Craig Owens

Craig Owens

My old 56 Chevy

56 Chevy Engine Swap. Just getting ready to pull the 427 big block. The plan was to freshen the 427 and install in my 55 Chevy, take the 327 from my 55 and freshen it up, clean up a few details on the 56 and have some fun with it, then sell it, taking any profit to rebuild the 427. The 427 had some good stuff in it, but the block and been damaged, probably from a clutch explosion, and welded up, plus it was already bored .060. Heads were amateur ported to the max, so I didn't want to use 'em. Cam had wiped out, which was why the previous owner sold the car in the first place. I ended up finding a 454 in parts, and building that instead.

0
278
0
16 Jun 2010
9 15 04 Interior view. The roll cage was 10-point, with removable swing-out side bars. Made it nearly impossible to get into the back seat.
Craig Owens

Craig Owens

My old 56 Chevy

9 15 04 Interior view. The roll cage was 10-point, with removable swing-out side bars. Made it nearly impossible to get into the back seat.

0
323
0
16 Jun 2010
9 15 04
Craig Owens

Craig Owens

My old 56 Chevy

9 15 04

0
298
0
16 Jun 2010
9 15 04
Craig Owens

Craig Owens

My old 56 Chevy

9 15 04

0
282
0
16 Jun 2010
9 15 04 A front view...
Craig Owens

Craig Owens

My old 56 Chevy

9 15 04 A front view...

2
364
0
16 Jun 2010
Craig Owens, Jun 16, 2010
Page 1 of 2
    There are no comments to display.
Register now to get rid of these ads!
Top

Archive

Support

Support The Jalopy Journal - Contact Us - Log In

Subscribe

By Email - RSS
-
Our Affiliate Link Policy

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.